|


LED Rope Lighting Specifications:
- LED Rope Diameter: 1/2"
- Lamp Spacing: 1"
- Lamp Life: 60,000 Hours
- Lengths: 15' – in blister pack 150' – on
a single roll
- Energy Consumption: .77 Watts per foot.
- Linkable: Up to 240'
- Very Low Heat: LED Rope Lighting generates very little heat
and uses 90% less energy
- Adjustable Length: Mix and Match different lengths to achieve
the desired length.
- Easy to Install: Mounting Clips Included
- Voltage: 120V
- Flexible
- UL Listed
- Optional: 3' Male / Female extension
Because of the popularity of LED rope lights for commercial and
residential use the UL standards have been up dated and LED rope
light is no longer field cuttable.
LED Rope light – Special Instructions
LED rope lighting is brighter than incandescent rope lights. It
has a longer life but the applications are similar.
Please see cutting instructions – LED is cuttable every
36” and must be cut where you see the scissors mark and the
information that is on the rope light.
Please do not cut when plug into wall outlet
Make sure that when sharp pins of the male connector are inserted
they are touching the wires in the rope light itself – If
they do not touch they will not make contact and not light.
Also make sure you put a plastic end cap on the rope before you
put into electric socket. IF NOT IT WILL CAUSE A SHOCK HAZARD.
Use caution when working with rope lights and check your local
fire ordinances. Rope lighting should be cut and installed
by a licensed electrician only
|